Filter
Top Products
74 3Com Router 5000/6000 Family
Command Reference
ft1 clock
Use the ft1 clock command to configure clocking on the T1-F interface.
T1-F Interface view
ft1 code
Use the ft1 code command to configure line code format for a T1-F interface.
T1-F Interface view
ft1 data-coding
Use the ft1 data-coding normal command to disable user data inversion on the T1-F interface.
Use the
ft1 data-coding inverted command to enable user data inversion on the CT1/PRI interface.
T1-F Interface view
ft1 fdl
Use the ft1 fdl command to set the behavior of the T1-F interface on the FDL in ESF framing.
T1-F Interface view
ft1 loopback
Use the ft1 loopback command to place the T1-F interface in local or remote loopback.
T1-F Interface view
ft1 sendloopcode
Use the sendloopcode command to send remote loopback control code.
T1-F Interface view
ft1 timeslot-list
Use the ft1 timeslot-list command to bundle timeslots on the T1-F interface.
T1-F Interface view
ft3 (CT3 Interface)
Use the ft3 command to configure the CT3 interface to operate in FT3 mode and to set the DSU mode and
subrate for FT3.
CT3 Interface view
ftp
Use the ftp command to set up control connection to the remote FTP server and enter FTP client view.
User view
ftphost source-interface
Use the ftp host source-interface command to specify the source interface that the FTP client uses
when accessing the specified FTP server. This interface must be an exiting local interface.
User view
ftphost source-ip
Use the ftp host source-ip command to specify the source IP address that the FTP client uses when
accessing the specified FTP server.
User view
ftp-operation
Use the ftp-operation command to configure the FTP operation done by the system.
HWPing Test Group view
ftp server enable
Use the ftp server enable command to enable the FTP server to allow login of FTP users.
System view
ftp-server source-interface
Use the ftp-server source-interface command to specify a source interface, which must be an existing
local interface, for the FTP server.
System view
ftp-server source-ip
Use the ftp-server source-ip command to specify a source IP address for the packets sent by the FTP
server. This IP address must be a local IP address.
System view
ftp source-interface
Use the ftp source-interface command to specify a source interface, which must be an existing local
interface, for the FTP client.
System view
ftp source-ip
Use the ftp source-ip command to specify a source IP address for the packets sent by the FTP client.
This IP address must be a local IP address.
System view