Filter
Top Products
98 3Com Router 5000/6000 Family
Command Reference
min-active-links
Use the min-active-links command to configure the minimum number of available links required for the
IMA group to operate.
IMA Group Interface view
mkdir
Use the mkdir command to create a directory on the remote FTP server.
FTP Client view
mkdir
Use the mkdir command to create a directory on the remote SFTP server.
SFTP Client view
mkdir
Use the mkdir command to create a directory under the specified directory on the specified storage device.
User view
mobile-ip
Use the mobile-ip command to enable the MIP function.
System view
mobile-ip foreign-agent
Use the mobile-ip foreign-agent command to set foreign agent care-of addresses and the pending time.
System view
mobile-ip foreign-agent service
Use the mobile-ip foreign-agent service command to enable FA service on an interface.
Interface view
mobile-ip home-agent
Use the mobile-ip home-agent command to enable HA service on a router.
System view
mobile-ip home-agent mobile-router
Use the mobile-ip home-agent mobile-router command to configure an MR on an HA. This command
will bring you to HA-MR view.
System view
mobile-ip irdp
Use the mobile-ip irdp command to enable IRDP and configure the relevant attributes on an interface.
Interface view
mobile-ip mobile-router
Use the mobile-ip mobile-router command to enable the MR function and enter MR view.
System view
mobile-ip mobile-router ccoa
Use the mobile-ip mobile-router ccoa only command to specify that the interface can only use a
co-located care-of address to register.
Use the
mobile-ip mobile-router ccoa only gateway command to configure the default gateway for the
interface using a co-located care-of address to register.
Interface view
mobile-ip mobile-router roam
Use the mobile-ip mobile-router roam command to enable the roaming function on the interface, that
is, to allow the interface to function as the roaming interface of the MR.
Interface view
mobile-ip mobile-router solicit
Use the mobile-ip mobile-router solicit command to configure agent solicitation retransmission
parameters.
Interface view
mobile-ip prefix-length
Use the mobile-ip prefix-length command to add the prefix-length extension part in the agent
advertisement.
Interface view
mobile-ip registration-lifetime
Use the mobile-ip registration-lifetime command to set the registration lifetime of the MN.
Interface view
mobile-ip secure
Use the mobile-ip secure command to configure mobility security associations on HAs, FAs, and MRs.
System view