Filter
Top Products
124 3Com Router 5000/6000 Family
Command Reference
reset bgp
Use the reset bgp peer-address command to reset the connection of BGP with a specified peer.
User view
reset bgp flap-info
Use the reset bgp flap-info command to reset the flap statistics of routes.
User view
reset bgp group
Use the reset bgp group command to reset the BGP connections of all the members in the specified peer
group.
User view
reset bridge address-table
Use the reset bridge command to clear all the dynamic address entries or the entries of a specified bridge
set or a specified interface in the forwarding table.
User view
reset bridge traffic
Use the reset bridge traffic command to clear the traffic statistics of a bridge set on a interface.
User view
reset clns statistics
Use the reset clns statistics command to reset statistics information about CLNS flow.
User view
reset counters controller e1
Use the reset counters controller e1 command to clear the controller counter for the CE1/PRI interface.
User view
reset counters controller t1
Use the reset counters controller t1 command to clear the controller counter for the CT1/PRI interface.
User view
reset counters encrypt
Use the reset counters interface encrypt command to clear the statistics on the encryption card.
User view
reset counters interface
Use the reset counters interface command to reset the statistics about the port.
User view
reset counters interface
Use the reset counters interface command to clear statistics about the transmitted and received
packets, IP, ARP, and ICMP on the specified interface or all interfaces.
User view
reset dampening
Use the reset dampening command to clear the dampening information and flap statistics of a route and
release the suppression of a suppressed route.
User view
reset dhcp ip-in-use
Use the reset dhcp server ip-in-use command to clear the DHCP dynamic address binding information,
outdated or not.
User view
reset dhcp relay statistics
Use the reset dhcp relay statistics command to clear the DHCP relay statistics.
User view
reset dhcp server conflict
Use the reset dhcp server conflict command to clear the statistics about DHCP address collision.
User view
reset dhcp server statistics
Use the reset dhcp server statistics command to clear the statistics on the DHCP server, including
such information as number of DHCP address pools, automatically and manually bound addresses and
expired addresses, number of unknown packets, number of DHCP request packets, and number of
response packets.
User view