Filter
Top Products
3Com Router 5000/6000 Family 113
Command Reference
portal auth-network
Use the portal auth-network command to configure a network segment for portal authentication.
System view
portal fast-authentication
Use the portal fast-authentication command to enable fast portal authentication.
System view
portal free-ip
Use the portal free-ip command to configure a free IP address.
System view
portal free-user
Use the portal free-user command to configure a portal authentication-free user.
System view
portal method
Use the portal method command to specify a portal authentication method.
System view
portal resource
Use the portal resource command to create an accessible-resource name.
System view
portal server
Use the portal server command to configure a portal server or modify the configuration of a portal server.
System view
portal service-type
Use the portal service-type command to set the portal authentication mode.
System view
portal update-resource
Use the portal update-resource command to add an IP address to update resources.
System view
portal update-resource-id
Use the portal update-resource-id command to configure the update-resource ID.
System view
portal upload-ip
Use the portal upload-ip command to configure the IP address of the interface connected to the CAMS
server.
Ethernet Interface view
pos-server app tcp
Use the pos-server app tcp command to configure a POS application in TCP/IP connection mode.
System view
pos-server app x25
Use the pos-server app x25 command to configure the specified POS application on the POSPAD client
router.
System view
pos-server checkschar
Use the pos-server checkschar command to enable the system to check POS packets for the string 10 04.
System view
pos-server enable
Use the pos-server enable command to enable POS access server.
System view
pos-server fcm
Use the pos-server fcm command to configure FCM parameters for modem negotiation.
System view
pos-server map
Use the pos-server map command to configure a multi-application POS access map entry.
System view
pos-server padmode
Use the pos-server padmode command to configure a POSPAD packet encapsulation format.
System view