Filter
Top Products
94 3Com Router 5000/6000 Family
Command Reference
llc2 receive-window
Use the llc2 receive-window command to configure the maximum packets that can be sent before the
LLC2 receives the acknowledgement frame.
Ethernet Interface view
llc2 timer ack
Use the llc2 timer ack command to configure the LLC2 local response time.
Ethernet Interface view
llc2 timer ack-delay
Use the llc2 timer ack-delay command to configure the local acknowledgement delay time when the
LLC2 receives information frames.
Ethernet Interface view
llc2 timer busy
Use the llc2 timer busy command to configure the LLC2 BUSY time.
Ethernet Interface view
llc2 timer poll
Use the llc2 timer poll command to configure the P/F waiting time of the LLC2.
Ethernet Interface view
llc2 timer reject
Use the llc2 timer reject command to configure the REJ time of the LLC2.
Ethernet Interface view
loadbandwidth
Use the loadbandwidth command to allocate load bandwidth to the interface.
Interface (Excluding Logical Interfaces) view
local
Use the local command to configure the subnet type in IKE negotiation.
IKE-Peer view
local-address
Use the local-address command to configure the IP address of the local GW in IKE negotiation.
IKE-Peer view
local-server
lUse the local-server command to configure a local RADIUS authentication server.
System view
local-user
lUse the local-user command to configure the user name and password of a client.
Dvpn-Class view
local user
Use the local-user command to add a local user and enter the local user view.
System view
local-user password-display-mode
Use the local-user password-display-mode command to configure the password display mode of all the
local users.
System view
locality
Use the locality command to name the geographical locality of an entity, by a city for example.
PKI Entity view
lock
Use the lock command to lock the active user interface and prevent unauthorized users from accessing it.
The active user interface can be console, AUX, or VTY.
User view
log enable
Use the log enable command to enable ASPF session logging function.
ASPF Policy view
log-peer-change
Use the log-peer-change command to turn on the BGP adjacency changes output switch.
BGP view
log-peer-change
Use the log-peer-change command to configure to log the IS-IS adjacency changes.
IS-IS view