Filter
Top Products
3Com Router 5000/6000 Family 73
Command Reference
fragment
Use the fragment command to enable the FRF.12-compliant fragmentation function on frame relay virtual
circuit.
Frame Relay Class view
frame-format
Use the frame-format command to set the frame format of ATM OC-3c/STM-1 interface.
ATM Interface view
frame-format
Use the frame-format command to configure the ATM over E1/T1 framing format.
ATM E1/T1 Interface view
frame-format
Use the frame-format command to configure frame format of ATM E3/T3 interface.
ATM E3/T3 Interface view
frame-format
Use the frame-format command to set the frame type of the CPOS interface.
CPOS Interface view
frame-format
Use the frame-format command to set the frame format of the POS interface.
POS Interface view
frame-format (CE1/PRI Interface)
Use the frame-format command to set the frame format on the CE1 interface.
CE1/PRI Interface view
frame-format (CT1/PRI Interface)
Use the frame-format command to set the frame format on the CT1/PRI interface.
CT1/PRI Interface view
frame-format (CT3 Interface)
Use the frame-format command to configure the frame format used by the CT3 interface.
CT3 Interface view
frame-length
Use the frame-length command to configure the number of ATM cells in an IMA frame.
IMA Group Interface view
framefill none
Use the framefill none command to disable a serial interface to send interframe filling tags.
Synchronous Serial Interface view
Asynchronous Serial Interface view
AUX Interface view
AM Interface view
free unused porttag
Use the free unused porttag command to release the port tag resources used by removed interfaces for
creating new interfaces.
System view
free user-interface
Use the free user-interface number command to disconnect the user corresponding to the user
interface specified by its absolute index.
User view
frequency
Use the frequency command to configure an automatic test interval.
HWPing Test Group view
ft1 alarm-threshold
Use the alarm-threshold command to configure the alarm thresholds on the T1-F interface as needed.
T1-F Interface view
ft1 bert (T1-F Interface)
Use the ft1 bert command to start a BERT test on the T1-F interface.
T1-F Interface view
ft1 cable
Use the ft1 cable command to configure attenuation or transmission segment matching the T1-F interface.
T1-F Interface view