Filter
Top Products
42 3Com Router 5000/6000 Family
Command Reference
display encrypt-card fast-switch
Use the display encrypt-card fast-switch command to view the entries in the fast forwarding cache for
the encryption cards.
Any view
display encrypt-card sa
Use the display encrypt-card sa command to view SA information.
Any view
display encrypt-card statistics
Use the display encrypt-card statistics command to view statistics on the specified or all encryption
cards.
Any view
display encrypt-card syslog
Use the display encrypt-card syslog command to view the current system log on the encryption cards.
Any view
display environment
Use the display environment command to view the current values and the thresholds of the hardware
system environment.
Any view
display esis
Use the display esis command to display current ES-IS protocol state, such as the configuration timer
(CT) to send ISH packets, the holding time (HT) of the information ISH packets carry.
Any view
display esis interface
Use the display esis interface command to display ES-IS related information about a specified
interface.
Any view
display esis peer
Use the display esis peer command to display information about the neighbors dynamically discovered
by ES-IS protocol (including dynamic ES and IS neighbors).
Any view
display esis statistics
Use the display esis statistic command to display statistics information about ES-IS flow.
Any view
display fcm
Use the display fcm command to display the count of dial-up negotiation failures and the count of
disconnections upon transaction timeouts for FCM module interfaces.
Any view
display fe1 serial
Use the display fe1 serial command to view the configuration and state about the specified or all E1-F
interfaces.
Any view
display fib
Use the display fib command to view the summary of the Forwarding Information Base.
Any view
display fib acl
Use the display fib acl command to filter and display FIB information.
Any view
display fib begin
Use the display fib command to output the lines related to the line containing the character string text in
the buffer according to the regular expression.
Use the
display fib | begin text command to view the lines beginning from the line containing the
character string text to the end line of the buffer.
Use the
display fib | include text command to just view the lines containing the character string text.
Use the
display fib | exclude text command to view the lines not containing the character string text.
Any view
display fib ip-prefix
Use the display fib ip-prefix command to filter and display FIB information by prefix-list name in certain
format.
Any view