Filter
Top Products
12 3Com Router 5000/6000 Family
Command Reference
ca identifier
Use the ca identifier command to specify the CA this device trusts and have the "name" CA bound with
this device.
PKI Domain view
cable
Use the cable command to set the cable length matching the CE1/PRI interface.
CE1/PRI Interface view
cable
Use the cable command to set the cable length of the ATM E1 interface.
ATM E1/T1 Interface view
cable
Use the cable command to configure the cable mode of ATM T3 cable, i.e., to set the distance between the
router and the cable distribution frame.
ATM T3 Interface view
cable (CT1/PRI Interface)
Use the cable command to set cable attenuation and length on a CT1/PRI interface to match the distance
of the transmission line.
CT1/PRI Interface view
cable (CT3 Interface)
Use the cable command to configure the length of the cable with which a CT3 interface is connected.
CT3 Interface view
cache-sa-enable
Use the cache-sa-enable command to enable the router to cache SA state.
MSDP view
call-mode
Use the call-mode command to configure a call-mode for calls between local router and peer router.
Voice Entity view
callednumber receive-method
Use the callednumber receive-method command to enable the device to place a call immediately after all
digits of the called number are collected or after a pound sign (#), the terminator, is received.
Voice Access-Number view
caller-permit
Use the caller-permit command to configure the calling numbers that are permitted to call in.
Voice Entity view
car
Use the car command to configure traffic monitoring for a behavior.
Traffic Behavior view
card-digit
Use the card-digit command to configure the number of digits in a card number for an access service
number.
Voice Access-Number view
cas
Use the cas command to enter the R2 CAS view and digital E&M Signaling view.
CE1/PRI Interface view
cbs
Use the cbs command to set the committed burst size of frame relay virtual circuit.
Frame Relay Class view
ccc interface out-interface
Use the ccc interface out-interface command to create a local CCC connection.
System view
ccc interface transmit-lsp receive-lsp
Use the ccc interface transmit-lsp receive-lsp command to create a remote CCC connection.
System view
cd
Use the cd command to change the current path on the SFTP server. If you do not specify the remote-path
argument, the current path is displayed.
SFTP Client view