Filter
Top Products
3Com Router 5000/6000 Family 99
Command Reference
mobile-ip tunnel path-mtu-discovery
Use the mobile-ip tunnel path-mtu-discovery command to set the PMTU update policy.
System view
mobile-ip virtual-network
Use the mobile-ip virtual-network command to define a virtual network.
System view
mobile-network
Use the mobile-network command to configure a mobile network for an MR.
HA-MR view
mobile-network
Use the mobile-network command to configure a mobile network for the MR.
MR view
mobile-node
Use the mobile-node command to set MN attributes, including the interface or virtual network and the
registration lifetime.
System view
mode
Use the mode command to configure the R2 signaling mode in a country or region.
R2 CAS view
mode (SIP Client view)
Use the mode command to set the registration mode of the gateway.
SIP Client view
modem
Use the modem or modem both command to allow modem calls to pass through, both incoming and outgoing.
Use the
modem [ call-in | call-out ] command to allow incoming or outgoing modem calls to pass
through.
User Interface view
modem adapt no-waiting-connect
Use the modem adapt no-waiting-connect command to set the asynchronous serial interface Modem to
switch from IDLE to ACTIVE without waiting for receiving the signal CONNECT (a signal used for a physical
modem to negotiation rate) after it receives CD_UP (a lower layer detects carrier signal).
User Interface view
modem auto-answer
Use the modem auto-answer command to have the external modem connected to the asynchronous
interface automatically answer or hook off.
User Interface view
modem auto-answer
Use the modem auto-answer command to set the answering mode to auto-answer.
User Interface view
modem compatible-param
Use the modem compatible-param command in the case that you fail to use standard Modem PCM to
interoperate with devices from other vendors.
Voice Entity view
modem protocol
Use the modem protocol none protocol to disable Modem function for single voice entity.
Use the
modem protocol pcm command to configure PCM Modem protocol type for single voice entity,
including coding/decoding and Modem negotiation mode.
Voice Entity view
modem timer answer
Use the modem timer answer command to set the timeout time spent waiting for the carrier signal after the
off-hook action when setting up an incoming call connection.
User Interface view.
monitor-port
Use the monitor-port command to specify the current port as the monitoring port
Ethernet Interface view
more
Use the more command, you can view the contents of the specified file.
User view