Filter
Top Products
136 3Com Router 5000/6000 Family
Command Reference
send-busytone
Use the send-busytone command to enable busy tone sending on the FXO interface.
FXO Voice Subscriber-Line view
send-number (in Voice Entity View)
Use the send-number command to configure the number sending mode.
POTS Voice Entity view
send-number (in Voice Subscriber-Line View)
Use the send-number command to configure the FXS voice subscriber-line to allow the FXS to send called
numbers.
FXS Voice Subscriber-Line View
send-ring
Use the send-ring command to enable the local end to play ringback tone.
VoIP Voice Entity view
send-trap
Use the send-trap command to configure the type of events that trigger trap sending.
HWPing Test Group view
sendat
Use the sendat command to manually send AT command to the modem.
Interface (Asynchronous Serial Interface, AUX Port, or AM Interface) view
sendloopcode
Use the sendloopcode command to send the remote loopback control code.
CT1/PRI Interface view
sendpacket passroute
Use the sendpacket passroute command to enable routing table bypass.
HWPing Test Group view
sendring
Use the sendring command to enable or disable the terminating point to send ring-back tone or busy tone
signal to the calling party.
R2 CAS view
seq-number
Use the seq-number command to enable voice packets transmitted on the local gateway to carry sequence
numbers.
Voice Entity view
server type
Use the server-type command to configure the RADIUS server type supported by the router.
RADIUS view
service cbr
Use the service cbr command to specify PVC service type as constant bit rate (CBR).
PVC view
service data
Use the service data command to enable data call service.
Voice Entity view
service modem-callback
Use the service modem-callback command to enable the callback function of modems.
System view
service type
Use the service-type command to configure a service type for a particular user.
Local User view
service-type ftp
Use the service-type ftp command to specify a directory accessible for the FTP user.
Local User view
service-type ppp
Use the service-type command to configure the callback attribute and caller number of the PPP user.
Local User view
service ubr
Use the service ubr command to specify the service type of PVC as Unspecified Bit Rate (UBR) and
specify the related rate parameters.
PVC view