Filter
Top Products
114 3Com Router 5000/6000 Family
Command Reference
pos-server source-ip
Use the pos-server source-ip command to bind the specified application with the source address of a
TCP connection.
System view
pos-server wait-time
Use the pos-server wait-time command to set the POSPAD wait timer.
System view
power-source
Use the power-source command to enable remote power supply.
BSV Interface view (in NT mode)
ppp authentication-mode
Use the ppp authentication-mode command to set the mode that the local PPP uses to authenticate the
peer router.
Interface view
Virtual-Template Interface view
ppp callback
Use the ppp callback command to enable an interface to send or accept PPP callback requests.
Physical or Dialer Interface view
ppp callback ntstring
Use the ppp callback ntstring command to configure the dial number required for a Windows NT server
to call back the router.
Physical or Dialer Interface view
ppp chap password
Use the ppp chap password command to configure the password for CHAP authentication.
Interface view
ppp chap user
Use the ppp chap user command to configure the user name when performing the CHAP authentication.
Interface view
ppp compression iphc
Use the ppp compression iphc command to enable IP header compression on the interface.
Interface view
ppp compression iphc rtp-connections
Use the ppp compression iphc rtp-connections command to designate the connections number of IP
Header Compression allowed on one interface.
Interface view
ppp compression iphc tcp-connections
Use the ppp compression iphc tcp-connections command to configure the connection number of TCP
compression mode.
Interface view
ppp compression stac-lzs
Use the ppp compression stac-lzs command to enable STAC-LZS compression for PPP.
Interface view
ppp ipcp dns
Use the ppp ipcp dns command to enable the router to allocate a DNS address to the peer.
Interface view
ppp ipcp dns admit-any
Use the ppp ipcp dns admit-any command to enable the router to accept the unsolicited DNS server
address allocated by the peer without sending a DNS request.
Interface view
ppp ipcp dns request
Use the ppp ipcp dns request command to enable the router to request the peer for a DNS server
address.
Interface view
ppp ipcp remote-address forced
Use the ppp ipcp remote-address forced command to forbid the peer to use the fix self-configured IP
address but the one allocated by this router.
Interface view