Filter
Top Products
58 3Com Router 5000/6000 Family
Command Reference
display status interface
Use the display status interface command to display the state of the specified interface.
Any view
display status interface ima-group
Use the display status interface ima-group command to view detailed information about the specified
IMA group interface.
Any view
display stop-accounting-buffer
Use the display stop-accounting-buffer command to view information on the stop-accounting requests
buffered in the router.
Any view
display tcp statistics
Use the display tcp statistics command to view TCP traffic statistic information.
Any view
display tcp status
Use the display tcp status command to monitor TCP connection any time.
Any view
display tcp status
Use the display tcp status command to view information about the current TCP connections on the
router.
Any view
display telnet-server source-ip
Use the display telnet-server source-ip command to display the source IP address configured for the
Telnet server.
Any view
display tftp-server
Use the display tftp-server command to view TFTP server state and attributes setting.
Any view
display tftp source-ip
Use the display tftp source-ip command to display the source IP address configured for the TFTP
client.
Any view
display this
Use the display this command to view the current configurations in current view.
Any view
display time-range
Use the display time-range command to view the configuration and the status of time range. For the
active time range at present, it displays "active" and for the inactive time range, it displays "inactive".
Any view
display traffic behavior
Use the display traffic behavior command to display the information of the traffic behavior configured
on the router.
Any view
display traffic classifier
Use the display traffic classifier command to view the configuration information about class of the
router.
Any view
display trapbuffer
Use the display trapbuffer command to view the information entries in the trap buffer.
Any view
display udp-helper server
Use the display udp-helper server command to display the information about the destination servers
associated with the specified or all Ethernet interfaces.
Any view
display udp statistics
Use the display udp statistics command to view TCP traffic statistic information.
Any view