Filter
Top Products
3Com Router 5000/6000 Family 111
Command Reference
peer timer
Use the peer timer command to configure Keepalive and Holdtime intervals for a peer (group).
BGP view
peer upe
Use the peer upe command to configure BGP peer as the UPE of hierarchical BGP/MPLS VPN.
BGP view
permanent-active
Use the permanent-active command to configure BSV interfaces to permanent active.
BSV Interface view (in NTmode)
pfs
Use the pfs command to set the Perfect Forward Secrecy (PFS) feature for the IPSec policy to initiate the
negotiation.
IPSec Policy view
IPSec Policy Template view
phy-mru
Use the phy-mru command to configure in asynchronous flow mode MRU at the physical layer.
Asynchronous Serial Interface view
physical-mode
Use the physical-mode command to set the operating mode of the synchronous/asynchronous serial
interface.
Serial Interface view
pim
Use the pim command to enter PIM view.
System view
pim bsr-boundary
Use the pim bsr-boundary command to configure an interface to become the PIM domain boundary.
Interface view
pim dm
Use the pim dm command to enable PIM-DM.
Interface view
pim neighbor-limit
Use the pim neighbor-limit command to limit PIM neighbor number on an router interface. If the number
exceeds the limit configured, no new neighbor can be added to the router.
Interface view
pim neighbor-policy
Use the pim neighbor-policy command to configure a router to filter the PIM neighbor of the current
interface.
Interface view
pim sm
Use the pim sm command to enable PIM-SM protocol on an interface.
Interface view
pim timer hello
Use the pim timer hello command to configure the interval for sending PIM router Hello messages.
Interface view
ping
Use the ping command to test connectivity of an IP network and reachability of a host.
Any view
ping clns
Use the ping clns command to test the reachability to a specified destination.
Any view
ping ipx
Use the ping ipx command to check host reachability and network connectivity in IPX network.
Any view
pki delete-certificate
Use the pki delete-certificate command to delete the locally stored certificates.
System view