Filter
Top Products
3Com Router 5000/6000 Family 57
Command Reference
display snmp-agent community
Use the display snmp-agent community command to view information on the configured communities of
SNMPv1 or SNMPv2.
Any view
display snmp-agent group
Use the display snmp-agent group command to view information about the specified or all user security
model (USM) based groups, including group name, security model, storage type.
Any view
display snmp-agent mib-view
Use the display snmp-agent mib-view command to view the configured MIB views.
Any view
display snmp-agent statistics
Use the display snmp-agent statistics command to view the state and statistics about SNMP.
Any view
display snmp-agent sys-info
Use the display snmp-agent sys-info command to view the system information of this SNMP device.
Any view
display snmp-agent trap-list
Use the display snmp-agent trap-list command to display whether trap sending is enabled on each
module.
Any view
display snmp-agent usm-user
Use the display snmp-agent usm-user command to view information about the specified or all SNMP
users.
Any view
display sot
Use the display sot command to display the current state about SOT connections.
Any view
display ssh server
Use the display ssh server command to view information on SSH status or sessions.
Any view
display ssh server-info
Use the display ssh server-info command to view the associations of public key to SSH server
maintained at the client end.
Any view
display ssh-server source-ip
Use the display ssh-server source-ip command to display the source IP address configured for the SSH
server.
Any view
display ssh user-information
Use the display ssh user-information command to view information about current SSH users, including
user name, corresponding key name and user authentication mode. If you specify the username
parameter, then only the information about the specified user is displayed.
Any view
display ssh2 source-ip
Use the display ssh2 source-ip command to display the source IP address configured for the SSH client.
Any view
display standby flow
Use the display standby flow command to view statistics about the traffic on the main interfaces
participating in backup load sharing.
Any view
display standby state
Use the display standby state command to view information about the main and standby interfaces.
Any view
display startup
Use the display startup command to view the configuration file used at this startup and the one used for
next startup.
User view