Filter
Top Products
22 3Com Router 5000/6000 Family
Command Reference
debugging ipsec
Use the debugging ipsec command to turn IPSec debugging on.
User view
debugging ipx packet
Use the debugging ipx packet command to enable IPX packet debugging switch to view the contents of
IPX packet received and transmitted.
User view
debugging ipx ping
Use the debugging ipx ping command to enable IPX Ping packet debugging switch to view the contents
of Ping packet received and transmitted.
User view
debugging ipx rip
Use the debugging ipx rip command to enable RIP debugging switch to view information on RIP packet
received and transmitted, routing changes and timer expiry.
User view
debugging ipx rtpro-flash
Use the debugging ipx rtpro-flash command to turn on the debugging switch of route refreshing in the
IPXRM module.
User view
debugging ipx rtpro-interface
Use the debugging ipx rtpro-interface command to turn on the debugging switch of interface change
in the IPXRM module.
User view
debugging ipx rtpro-routing
Use the debugging ipx rtpro-routing command to turn on the debugging switch of route change in the
IPXRM module.
User view
debugging ipx sap
Use the debugging ipx sap command to enable IPX SAP debugging switch to view information on SAP
packet received and transmitted, routing changes and timer expiry.
User view
debugging isdn
Use the debugging isdn command to enable ISDN debugging.
User view
debugging isis
Use the debugging isis command to enable IS-IS debugging.
User view
debugging isis es-adjacency
Use the debugging isis es-adjacency command to enable debugging for IS-IS protocol-related events
occur on neighboring ESs.
User view
debugging isis is-adjacency
Use the debugging isis is-adjacency command to enable debugging for IS-IS protocol-related events
occur on neighboring ISs.
User view
debugging lapd
Use the debugging lapb command to enable LAPB debugging.
User view
debugging llc2
Use the debugging llc2 command to enable the LLC2 debugging.
User view
debugging llc2 packet
Use the debugging llc2 packet command to enable U frame debugging for LLC2.
User view
debugging local-server
Use the debugging local-server command to enable debugging for the local RADIUS authentication
server.
User view