Filter
Top Products
3Com Router 5000/6000 Family 85
Command Reference
ip fast-forwarding
Use the ip fast-forwarding command to enable unicast fast packet forwarding on both inbound and
outbound interfaces.
Use the
ip fast-forwarding inbound command to enable unicast fast packet forwarding on the inbound
interface.
Use the
ip fast-forwarding outbound command to enable unicast fast packet forwarding on the outbound
interface.
Interface view
ip forward-broadcast
Use the ip forward-broadcast command to enable the current interface to forward broadcasts.
Interface view
ip host
Use the ip host command to configure the IP address corresponding to a host name.
System view
ip ip-prefix
Use the ip ip-prefix command to configure an address prefix list or one of its items.
System view
ip local policy route-policy
Use the ip local policy route-policy command to enable local policy routing.
System view
ip multicast-fast-forwarding
Use the ip multicast-fast-forwarding command to enable multicast fast forwarding on an interface.
Interface view
ip multicast-policy route-policy
Use the ip multicast-policy route-policy command to enable a multicast policy routing on an
interface.
Interface view
ip netstream aggregation
Use the ip netstream aggregation command to enter NetStream aggregation view.
System view
ip netstream export host
Use the ip netstream export host command to set the destination IP address and UDP port number for
NetStream UDP packets.
System view,
NetStream Aggregation view
ip netstream export source
Use the ip netstream export source command to configure a source interface for NetStream UDP
packets.
System view,
NetStream Aggregation view
ip netstream export version
Use the ip netstream export version command to configure the type of AS numbers to be recorded in
NetStream cache entries and the version of UDP packets.
System view
ip netstream format no-direction
Use the ip netstream format no-direction command to remove flow direction mark in the header of
NetStream log packet.
System view
ip netstream { inbound | outbound }
Use the ip netstream { inbound | outbound } command to enable NetStream statistics in the inbound
or outbound direction of the interface.
Interface view
ip netstream max-entry
Use the ip netstream max-entry command to set the NetStream cache size.
System view
ip netstream timeout active
Use the ip netstream timeout active command to set the active aging timer for NetStream cache entries.
System view