Filter
Top Products
132 3Com Router 5000/6000 Family
Command Reference
route-distinguisher
Use the route-distinguisher command to configure RD for an MPLS VPN instance. A vpn-instance
cannot run until it is configured with an RD.
MBGP VPN-Instance view
route-policy
Use the route-policy command to create a route-policy or a route-policy node and enter the corresponding
view.
System view
route-policy
Use the route-policy command to configure a route-policy node and enter the route-policy view.
System view
route-tag
Use the route-tag command to specify a tag value to identify VPN import route.
OSPF Protocol view
routed-bridge protocol
Use the routed-bridge protocol command to enable the support of routed bridge encapsulation to a
network protocol.
ATM PVC view
router id
Use the router id command to configure the ID of a router running the OSPF protocol.
System view
routing-table limit
Use the routing-table limit command to limit the route maximum in a vpn-instance, to avoid too many
routes in the ingress interface of the PE router.
MBGP VPN-Instance view
rsa local-key-pair create
Use the rsa local-key-pair create command to generate the local RSA host key pair and server key
pair.
System view
rsa local-key-pair destroy
Use the rsa local-key-pair destroy command to remove all RSA keys on the server (including the host
key pair and the server key pair).
System view
rsa peer-public-key
Use the rsa peer-public-key command to enter public key view. After that, you may use the
public-key-code begin command and the public-key-code end command to configure the public key of
the client.
System view
rsh
Use the rsh command to execute a command on a remote host remotely.
User View
rtpq
Use the rtpq command to configure to apply Realtime Transport Protocol (RTP) Priority Queuing.
Frame Relay Class view
rule
Use the rule command to add a rule in current ACL view.
ACL view
rule
Use the rule command to configure the number-substitute rules.
Voice Number-Substitute view
sa authentication-hex
Use the sa authentication-hex command to set the SA authentication key manually for the ipsec policy
of manual mode.
Manually-Established IPSec Policy view
sa duration
Use the sa duration command to specify the ISAKMP Sa duration for an IKE proposal.
IKE Proposal view