Filter
Top Products
3Com Router 5000/6000 Family 49
Command Reference
display isdn parameters
Use the display isdn parameters command to view the system parameters at layers 2 and 3 of the ISDN
protocol, such as the durations of system timers and frame size.
Any view
display isdn spid
Use the display isdn spid command to view information on SPID on the BRI interface encapsulated with
the NI protocol.
Any view
display isis brief
Use the display isis brief command to view the brief information of IS-IS.
Any view
display isis interface
Use the display isis interface command to view the information of the IS-IS enabled interface.
Any view
display isis lsdb
Use the display isis lsdb command to view the link state database of the IS-IS.
Any view
display isis mesh-group
Use the display isis mesh-group command to view the IS-IS mesh group.
Any view
display isis peer
Use the display isis peer command to view IS-IS peer information.
Any view
display isis routing
Use the display isis routing command to view IS-IS routing information
Any view
display isis routing clns
Use the display isis routing clns command to display CLNS routing information generated by IS-IS
protocol.
Any view
display isis spf-log
Use the display isis spf-log command to view the SPF calculation log of the IS-IS.
Any view
display llc2
Use the display llc2 command to view statistical information of LLC2.
Any view
display loadsharing ip address
Use the display loadsharing ip address command to view the statistics about the unbalanced load
sharing based on interface bandwidth, including the number and ratio of the packets sent from the interfaces
related to the equal-cost routes to a network address.
Any view
display local-server statistics
Use the display local-server statistics command to display statistics of the local RADIUS
authentication server.
Any view
display local-user
Use the display local-user command to view the relevant information on the specified local user or all
the local users. The output can help you troubleshoot faults related to local user.
Any view
display log startup
Use the display log startup command to display the state of the configuration restoration log switch.
User view
display logbuffer
Use the display logbuffer command to view the information recorded in the log buffer.
Any view
display logbuffer summary
Use the display logbuffer summary command to display a summary about the log buffer on the router.
Any view