Filter
Top Products
24 3Com Router 5000/6000 Family
Command Reference
debugging pim sm
Use the debugging pim sm command to enable PIM-SM debugging functions.
User view
debugging pki
Use the debugging pki command to enable PKI debugging functions.
Any view
debugging portal
Use the debugging portal command to enable portal debugging.
User view
debugging pos
Use the debugging pos event command to enable event debugging for the POS access service.
Use the
debugging pos error command to enable error debugging for the POS access service.
Use the
debugging pos packet command to enable packet debugging for the POS access service.
Use the
debugging pos all command to enable all debugging for the POS access service.
User view
debugging pos-app
Use the debugging pos-app command to enable debugging for the specified or all POS applications.
User view
debugging pos-interface
Use the debugging pos-interface command to enable debugging for the specified or all POS access
ports.
User view
debugging ppp { all | cbcp | ccp | scp }
Use the debugging ppp { all | cbcp | ccp | scp } command to enable PPP related cbcp, ccp, scp or
all debugging.
User view
debugging ppp { chap | pap }
Use the debugging ppp { chap | pap } command to enable PPP related CHAP or PAP debugging.
User view
debugging ppp { core | ip | ipcp | lcp | lqc | mp }
Use the debugging ppp { core | ip | ipcp | lcp | lqc | mp } command to enable PPP related core,
ip, ipcp, lcp, lqc or mp debugging.
User view
debugging ppp compression iphc rtp
Use the debugging ppp compression iphc rtp command to view debugging information about
IP/UDP/RTP header compression in IP header compression.
User view
debugging ppp compression iphc tcp
Use the debugging ppp compression iphc tcp command to view the single packet information of the
IP/TCP header compression.
User view
debugging pppoe-client
The command debugging pppoe-client is used to enable PPPoE Client debugging switch.
User view
debugging pppofr
Use the debugging pppofr command to enable PPPoFR debugging.
User view
debugging qllc
Use the debugging qllc command to enable QLLC debugging.
User view
debugging radius
Use the debugging radius command to enable RADIUS debugging.
User view
debugging rip
Use the debugging rip command to enable RIP debugging.
User view