Filter
Top Products
158 3Com Router 5000/6000 Family
Command Reference
web url-filter parameter delete
Use the web url-filter parameter delete command to delete a filter keyword previously added.
System view
web url-filter parameter delete-all
Use the web url-filter parameter delete-all command to delete all filter keywords.
System view
web url-filter parameter enable
Use the web url-filter parameter enable command to enable URL parameter filtering.
System view
web url-filter parameter load-file
Use the web url-filter parameter load-file command to load a URL parameter filtering file.
System view
web url-filter parameter save-file
Use the web url-filter parameter save-file command to save a URL parameter filter file.
System view
wfq
Use the wfq command to set the queue type of the VC to be WFQ.
Frame Relay Class view
wildcard-register enable
Use the wildcard-register enable command to enable fuzzy (wildcard) telephone number registration.
SIP Client view
wred
Use the wred command to configure drop mode as weighted random early detection (WRED).
Traffic Behavior view
wred dscp
Use the wred dscp command to set DSCP lower-limit, upper-limit and drop probability denominator of
WRED.
Traffic Behavior view
wred ip-precedence
Use the wred ip-precedence command to set precedence lower-limit, upper-limit and drop probability
denominator of WRED.
Traffic Behavior view
wred weighting-constant
Use the wred weighting-constant command to set exponential for the calculation of average queue
length by WRED.
Traffic Behavior view
x25 alias-policy
Use the x25 alias-policy command to configure the alias of an X.121 address.
Interface view
x25 call-facility
Use the x25 call-facility command to set user options for an X.25 interface. After an option is set, all
X.25 calls from the X.25 interface will carry the relevant information field in call packet.
Interface view
x25 cug-service
Use the x25 cug-service command to enable CUG service and suppression policies.
Interface view
x25 default-protocol
Use the x25 default-protocol command to set the default upper-layer protocol carried over X.25 for the
X.25 interface.
Interface view
x25 default-protocol
Use the x25 default-protocol command to set the upper layer protocol for an X.25 interface that X.25
protocol carries by default.
Interface view
x25 hunt-group
Use the x25 hunt-group command to create or enter an X.25 hunt group.
System view