Filter
Top Products
3Com Router 5000/6000 Family 139
Command Reference
sip-call
Use the sip-call command to enable globally supplementary service. body style (undo command
description goes here)
SIP Client view
sip-comp
Use the sip-comp command to configure a SIP compatibility option.
SIP Client view
sip-comp
Use the sip-comp command to configure a SIP compatibility option.
SIP Client view
sip-comp agent
Use the sip-comp agent command to configure including user-agent field in SIP request.
SIP Client view
sip-domain
Use the sip-domain command to configure the domain name of a SIP server.
SIP Client view
sip-id
Use the sip-id command to set ID of the local gateway and configure its SIP authentication password.
SIP Client view
sip-server
Use the sip-server command to configure address information of SIP proxy server and define call
requests that can be accepted.
SIP Client view
selectlanguage
Use the selectlanguage command to enable or disable the voice gateway to play the prompt language
selection message in the voice caller number process. This command only applies to the voice caller
number process.
Voice Access-Number view
slic-gain
Use the slic-gain command to configure the output gain of the SLIC chip.
Analog E&M Voice Subscriber-Line view
snmp-agent
Use the snmp-agent command to enable SNMP agent.
System view
snmp-agent community
Use the snmp-agent community command to configure the read/write attribute of a community, the MIB
view that it can access, and the ACL applied to it. The configuration overwrites the old configuration of the
community, if there is any.
System view
snmp-agent group
Use the snmp-agent group command to configure a new SNMP group, or to map an SNMP user or group
to an SNMP view.
System view
snmp-agent local-engineid
Use the snmp-agent local-engineid command to configure an engine ID for the local SNMP entity.
System view
snmp-agent mib-view
Use the snmp-agent mib-view command to create or update the information about a view.
System view
snmp-agent packet max-size
Use the snmp-agent packet max-size command to set the maximum length of the SNMP packets that the
agent can receive/send.
System view
snmp-agent sys-info
Use the snmp-agent sys-info command to set system information, including system contact, physical
location of the node, and SNMP version.
System view