Filter
Top Products
3Com Router 5000/6000 Family 11
Command Reference
bridge-set stp enable
Use the bridge-set stp enable command to disable STP on the port.
Interface view
bridge-set stp port pathcost
Use the bridge-set stp port pathcost command to configure the path cost of the bridge port.
Interface view
bridge-set stp port priority
Use the bridge-set stp port priority command to configure the priority of the bridge port.
Interface view
bridge stp ieee
Use the bridge stp ieee command to specify a bridge set to support IEEE STP.
System view
bridge stp max-age
Use the bridge stp max-age command to set the Max Age timer on the bridge.
System view
bridge stp priority
Use the bridge stp priority command to assign a priority to the bridge.
System view
bridge stp timer forward-delay
Use the bridge stp timer forward-delay command to set the Forward Delay timer on the bridge.
System view
bridge stp timer hello
Use the bridge stp timer hello command to set the Hello Time timer on the bridge.
System view
bridge vlanid-transparent-transmit enable
Use the bridge vlanid-transparent-transmit enable command to enable VLAN ID transparent
transmission.
Interface view
broadcast-limit link
Use the broadcast-limit link command to configure the maximum number of links that the virtual
template supports for sending multicast or broadcast packets.
Virtual Template view
broadcast suppression
Use the broadcast-suppression command to restrict the broadcast traffic size on the port.
Ethernet Port view
bsr-policy
Use the bsr-policy command to restrict the range for valid BSR, preventing BSR spoofing.
PIM view
bump
Use the bump command to configure the standby PVC that will take over when a specified PVC goes down.
ATM Pvc-Group view
busytone-t-th
Use the busytone-t-th command to configure the threshold of busy tone detection.
FXO Voice Subscriber-Line view
bye
Use the bye command to disconnect from the remote FTP server and exit to user view.
FTP Client view
bye
Use the bye command to terminate the connection to the remote SFTP server and exit to system view as
you would with the
exit and quit commands.
SFTP Client view
c-bsr
Use the c-bsr command to configure a candidate BSR.
PIM view
c-rp
Use the c-rp command to configure the router to advertise itself as a candidate RP to BSR.
PIM view