Filter
Top Products
134 3Com Router 5000/6000 Family
Command Reference
script trigger init
Use the script trigger init command to configure the Modem script that will be executed when the
system is powered on or rebooted.
User Interface view
script trigger login
Use the script trigger login command to configure the Modem script that will be executed when an
outgoing call connection is successfully established.
User Interface view
script trigger logout
Use the script trigger logout command to configure the Modem script that is executed when a link is
reset.
User-interface view
sdlc controller
Use the sdlc controller command to configure the secondary station address of the SDLC.
Synchronous Serial Interface view
sdlc mac-map local
Use the sdlc mac-map local command to configure the virtual MAC address of the SDLC.
Synchronous Serial Interface view
sdlc mac-map remote
Use the sdlc mac-map remote command to configure the SDLC peer.
Synchronous Serial Interface view
sdlc max-pdu
Use the sdlc max-pdu command to configure the maximum receivable frame length of the SDLC.
Synchronous Serial Interface view
sdlc max-send-queue
Use the sdlc max-send-queue command to configure the queue length sending the SDLC packet.
Synchronous Serial Interface view
sdlc max-transmission
Use the sdlc max-transmission command to configure the SDLC timeout retransmission times.
Synchronous Serial Interface view
sdlc modulo
Use the sdlc modulo command to configure the modulus of the SDLC.
Synchronous Serial Interface view
sdlc sap-map local
Use the sdlc sap-map local command to configure the SAP address on transforming the SDLC into the
LLC2.
Synchronous Serial Interface view
sdlc sap-map remote
Use the sdlc sap-map remote command to configure the remote DLSw device SAP address when SDLC
is translated into LLC2.
Synchronous Serial Interface view
sdlc simultaneous
Use the sdlc simultaneous command to configure the SDLC data to use the bidirectional transmission
mode.
Synchronous Serial Interface view
sdlc status
Use the sdlc role command to configure the SDLC role the device acts.
Synchronous Serial Interface view
sdlc timer ack
Use the sdlc timer ack command to configure the SDLC primary station response waiting time
(mseconds).
Synchronous Serial Interface view
sdlc timer lifetime
Use the sdlc timer lifetime command to configure the SDLC secondary station response waiting time
(mseconds).
Synchronous Serial Interface view
sdlc timer poll
Use the sdlc timer poll command to configure the SDLC poll pause timer.
Synchronous Serial Interface view