Filter
Top Products
82 3Com Router 5000/6000 Family
Command Reference
info-center monitor channel
Use the info-center monitor channel command to have the info-center output information over the
specified channel to the user terminal.
System view
info-center snmp channel
Use the info-center snmp channel command to set the information channel for SNMP.
System view
info-center source
Use the info-center source command to add records to an information channel.
System view
info-center synchronous
Use the info-center synchronous command to enable synchronous terminal output.
System view
info-center timestamp
Use the info-center timestamp command to set a time stamp format for the system information output to
the information channels except for the log host.
System view
info-center timestamp loghost
Use the info-center timestamp loghost command to set a time stamp format for the system information
output to the log host.
System view
info-center trapbuffer
Use the info-center trapbuffer command to enable the trap buffer, set its size and the channel that
outputs information to it.
System view
interface
Use the interface command to create a P2MP or P2P subinterface.
System view
interface
Use the interface command to enter the specified interface view or create a logical interface or
subinterface.
System view
interface
Use the interface command to enter Ethernet port view.
System view
interface atm
Use the interface atm command to enter the view of the specified ATM E1/T1 interface.
System view
interface bridge-template
Use the interface bridge-template command to create a bridge template interface, connecting the
specified bridge set to the routing network.
System view
interface dialer
Use the interface dialer command to create a dialer circular group for the Circular DCC, or configure a
dialer interface for the Resource-Shared DCC.
System view
interface encrypt
Use the interface encrypt command to enter encryption card interface view.
System view
interface ethernet
Use the interface ethernet command to create an Ethernet subinterface.
System view
interface ima
Use the interface ima command to enter the specified IMA group interface view.
System view
interface logic-channel
Use the interface logic-channel command to create a logical channel interface.
System view