Filter
Top Products
3Com Router 5000/6000 Family 147
Command Reference
tcp timer fin-timeout
Use the tcp timer fin-timeout command to configure the TCP finwait timer.
System view
tcp timer syn-timeout
Use the tcp timer syn-timeout command to configure the TCP synwait timer.
System view
tcp window
Use the tcp window command to configure the size of the transceiving buffer of the connection-oriented
Socket.
System view
telnet
Use the telnet command to telnet from this router to another device.
User view
telnet-server source-interface
Use the ftp-server source-interface command to specify a source interface, which must be an existing
local interface, for the Telnet server. After that, the IP address of the specified interface is used as the source
IP address in each packet sent by the Telnet server.
System view
telnet-server source-ip
Use the telnet-server source-ip command to specify a source IP address for the packets sent by the
Telnet server. This IP address must be a local IP address.
System view
telnet source-interface
Use the telnet source-interface command to telnet from the main IP address of the specified interface
to the destination IP address.
User view
System view
telnet source-ip
Use the telnet source-ip command to telnet from the specified source IP address to the specified
destination IP address.
User view
System view
terminal debugging
Use the terminal debugging command to have the debugging information displayed on the user terminal.
User view
terminal logging
Use the terminal logging command to have the log information displayed on the terminal.
User view
terminal monitor
Use the terminal monitor command to have the terminal display debugging /log/trap information sent from
the info-center.
User view
terminal trapping
Use the terminal trappingcommand to have the terminal display trap information.
User view
terminal type
Use the terminal type command to set the terminal type.
User Interface view
terminator
Use the terminator command to configure a special character string as the terminator of a telephone
number whose length is variable.
Voice Dial Program view
test-enable
Use the test-enable command to execute an HWPing test.
HWPing Test Group view
test-failtimes
Use the test-failtimes command to configure the number of consecutive test failures allowed before a
trap is sent to the NMS.
HWPing Test Group view