Filter
Top Products
3Com Router 5000/6000 Family 45
Command Reference
display ike dpd
Use the display ike dpd command to display the configuration of the specified or all DPD structures about
reference count, interval-time, and time_out.
Any view
display ike peer
Use the display ike peer command to view the configuration about the specified or all IKE peers.
Any view
display ike proposal
Use the display ike proposal command to view the parameters configured for each IKE proposal.
Any view
display ike sa
Use the display ike sa command to view the current security tunnels established by IKE.
Any view
display info-center
Use the display info-center command to view all the information recorded in the info-center.
Any view
display interface
Use the display interface command to view the LAPB or X.25 interface information. After configuring
PVC of X.25, users can use the command to obtain the status information on one interface.
Any view
display interface
Use the display interface command to view configuration information on the port.
Any view
display interface
Use the display interface command to view the current running state and other information about an
interface.
Any view
display interface atm
Use the display interface atm command to display the configuration and state information about the
specified or all ATM interfaces.
Any view
display interface bri
Use the display interface bri command to view status about the specified ISDN BRI interface.
Any view
display interface encrypt
Use the display interface encrypt command to view information about interfaces on the specified or all
encryption cards.
Any view
display interface {Ethernet Gigabithernet}
Use the display interface { ethernet | gigabitethernet } command to view information about
Ethernet interfaces, such as their configurations and current running state.
Any view
display interface ima-group
Use the display interface ima-group command to view the configuration and state information about
the specified or all IMA group interfaces.
Any view
display interface loopback
Use the display interface loopback command to view state about the specified or all created loopback
interfaces.
Any view
display interface mfr
Use the display interface mfr command to view information on one or all MFR interfaces, including
configuration, state, and packet statistics.
Any view
display interface mp-group
Use the display interface mp-group command to view the state about the specified or all MP-group
interfaces.
Any view