Filter
Top Products
148 3Com Router 5000/6000 Family
Command Reference
test-time begin
Use the test-time begin command to configure the start time and the lasting time of a test.
HWPing Test Group view
test-type
Use the test-type command to configure the type of the test.
HWPing Test Group view
tftp
Use the tftp command to upload or download a file through TFTP.
User view
tftp host source-interface
Use the tftp host source-interface command to specify the source interface that the TFTP client uses
when accessing the specified TFTP server.
User view
tftp host source-ip
Use the tftp host source-ip command to specify the source IP address that the TFTP client uses when
accessing the specified TFTP server. This source IP address must be a local address.
User view
tftp hostname vpn-instance
Use the tftp hostname vpn-instance to adopt VPN instance mode to access TFTP server and upload
and download files.
User view
tftp-server acl
Use the tftp-server acl command to reference an ACL to control access to the TFTP server.
System view
tftp-server directory
Use the tftp-server directory command to configure the directory TFTP Client can access.
System view
tftp-server enable
Use the tftp-server enable command to enable TFTP Server.
System view
tftp-server max-users
Use the tftp-server max-users command to maximum number of concurrent users that are allowed to
access TFTP server.
System view
tftp-server retry-times
Use the tftp-server retry-times command to configure maximum number of retry times for TFTP server
timeout retransmission.
System view
tftp-server timeout
Use the tftp-server timeout command to configure UDP packet response timeout time for TFTP server.
System view
tftp-server update
Use the tftp-server update command to set the file update mode that the FTP server uses while receiving
data.
System view
tftp source-interface
Use the ftp source-interface command to specify a source interface, which must be an existing local
interface, for the TFTP client.
System view
tftp source-ip
Use the ftp source-ip command to specify a source IP address for the packets sent by the TFTP client.
System view
time-out
Use the time-out command to configure the time waiting for a DPD acknowledgement.
DPD Structure view
time-range
Use the time-range command to specify a time range.
System view