Filter
Top Products
28 3Com Router 5000/6000 Family
Command Reference
default entity modem compatible-param
Use the default entity modem compatible-param command in the case that you fail to use standard
Modem PCM to interoperate with devices from other vendors.
Voice Dial Program view
default entity modem protocol
Use the default entity modem protocol none command to globally disable Modem function of voice
entity.
Use the
default entity modem protocol pcm command to globally configure PCM Modem protocol type
of voice entity, including coding/decoding and Modem negotiation mode.
Voice Dial Program view
default entity normal-connect slow-h245
Use the default entity normal-connect slow-h245 command to globally disable the calling end from
actively initiating an H245 connection request to the called end before the called end is hooked off.
Use the
default entity normal-connect slow-h245 command to default to globally disable the calling
end from actively initiating the H245 connection request to the called end before the called end is hooked
off. In this case, all newly created voice entities and voice entities which have not been configured with this
function will inherit this configuration.
Voice Dial Program view
default entity payload-size
Use the default entity payload-size command to configure the default time length of voice packets with
different coding formats.
Voice Dial Program view
default entity service data
Use the default entity service data command to globally configure enabling data call service.
Voice dial program view
default entity vad-on
Use the default entity vad-on command to globally configure enabling silence detection as the default
value.
Voice Dial Program view
default interval
Use the default interval command to configure the default interval for OSPF to redistribute external
routes.
OSPF view
default limit
Use the default limit command to configure default value of maximum number of redistributed routes.
OSPF view
default local-preference
Use the default local-preference command to configure the local preference.
BGP Unicast view
BGP Multicast view
VPNv4 view
default med
Use the default med command to configure the system MED value.
BGP Unicast view
BGP Multicast view
VPNv4 view
VPN Instance view
default-route-advertise
Use the default-route-advertise command to configure the default route of Level-1 and Level-2 routers.
IS-IS view
default-route-advertise
Use the default-route-advertise command to make the system generate a default route to OSPF area.
Use the
default-route-advertise command at ABR to generate a default route which is advertised via
the Type-5 LSA or Type-7 LSA no matter whether there is a default route in the routing table.
OSPF view
default-route imported
Use the default-route imported command to redistribute local default routes into BGP.
BGP view