Filter
Top Products
160 3Com Router 5000/6000 Family
Command Reference
x25 roa-list
Use the x25 roa-list command to define ROA list.
System view
x25 switch pvc
Use the x25 switch pvc (packet switching) command to configure one PVC route.
Interface view
x25 switch svc hunt-group
Use the x25 switch svc hunt-group command to add an X.25 switching route whose forwarding address
is a hunt group.
System view
x25 switch svc interface
Use the x25 switch svc interface command to add an X.25 switching route whose forwarding address
is a serial interface or Annex G DLCI.
System view
x25 switch svc xot
Use the x25 switch svc xot command to add an X.25 switching route whose forwarding address is XOT
channel.
System view
x25 switching
Use the x25 switching command to enable the X.25 switching function.
System view
x25 template
Use the x25 template command in system view to create an X.25 template and in DLCI view to reference
the template.
System view
DLCI view
x25 timer hold
Use the x25 timer hold command to set the delay to send calls to a destination with failed calls.
Interface view
x25 timer idle
Use the x25 timer idle command to set the maximum idle time of the SVC on the interface.
Interface view
x25 timer tx0
Use the x25 timer tx0 command to set the restart/retransmission timer delay for DTE (or DCE).
Interface view
x25 timer tx1
Use the x25 timer tx1 command to set calling request (indication) transmission timer delay for DTE (or
DCE).
Interface view
x25 timer tx2
Use the x25 timer tx2 command to set resetting request (indication) transmission timer delay for DTE (or
DCE).
Interface view
x25 timer tx3
Use the x25 timer tx3 command to set clearing request (indication) transmission timer delay for DTE (or
DCE).
Interface view
x25 vc-per-map
Use the x25 vc-per-map command to set the maximum number of VCs for connections with the same
destination device.
Interface view
x25 vc-range
Use the x25 vc-range command to set highest and lowest values of X.25 VC range.
Interface view
x25 window-size
Use the x25 window-size command to set the sizes of input and output windows on the interface X.25.
Interface view