Filter
Top Products
3Com Router 5000/6000 Family 21
Command Reference
debugging esis
Use the debugging esis event command to enable debugging for ES-IS protocol-related events. You can
display event information using this command, such as changes of neighbor states, entries in Level 0
routing table, and interface states.
Use the
debugging esis packet command to enable debugging for ES-IS packets. You display information
about received/transmitted ES-IS packets, such as packet size, packet type, packet HT, and Layer 2 and
Layer 3 address.
User view
debugging firewall
Use the debugging firewall command to enable the information debugging of the firewall packet filtering.
User view
debugging fr
Use the debugging fr command to enable frame relay information debugging.
User view
debugging fr compress
Use the debugging fr compress command to enable FRF9 IPHC debugging of frame relay.
User view
debugging fr compression
Use the debugging fr compression iphc command to enable FRF20 IPHC debugging of frame relay.
User view
debugging fr pvc-group
Use the debugging fr pvc-group command to enable debugging for the specified PVC group or all PVC
groups.
User view
debugging hdlc clns
Use the debugging hdlc clns command to enable debugging for HDLC OSI packets.
User view
debugging hwatacs
Use the debugging hwtacacs command to enable TACACS+ debugging.
User view
debugging hwping
Use the debugging hwping command to enable HWPing debugging.
User view
debugging igmp
Use the debugging igmp command to enable IGMP debugging functions.
User view
debugging ike
Use the debugging ike command to enable IKE debugging.
User view
debugging ike dpd
Use the debugging ike dpd command to enable IKE DPD debugging.
User view
debugging ip
Use the debugging ip icmp command to enable the ICMP debugging.
User view
debugging ip count
Use the debugging ip count command to enable debugging for the IP Accounting module (the IP
Accounting).
User view
debugging ip multicast-policy
Use the debugging ip multicast-policy command to enable the debugging of IP multicast policy routing.
User view
debugging ip netstream
Use the debugging ip netstream command to enable NetStream debugging.
User view
debugging ip urpf
Use the debugging ip urpf command to display the information on the rejected packets by URPF.
User view