Filter
Top Products
3Com Router 5000/6000 Family 105
Command Reference
number-match
Use the number-match command to configure a global number match-policy.
Voice Dial Program view
number-substitute
Use the number-substitute command to create a number-substitute list and enter voice dial program view.
Voice Dial Program view
oam ais-rdi
Use the oam ais-rdi command to change the parameters related to AIS/RDI alarm cell detection. If no
argument is specified, the default value applies.
ATM Class view
PVC view
oam frequency
Use the oam frequency command to enable the transmission of OAM F5 Loopback cell so as to check the
PVC status. You can also enable OAM F5 Loopback retransmission check or modify the related parameters
of the retransmission check.
ATM Class view
PVC view
oamping interface
Use the oamping interface command to enable the specified ATM interface to send OAM cells on the
specified PVC for checking link state. Receiving no response upon expiration of the specified time indicates
that the link is disconnected, busy, or prone to packet loss.
ATM Interface view
opaque-capability
Use the opaque-capability enable command to enable the Opaque capability of OSPF.
OSPF view
open
Use the open command to set up control connection to the remote FTP server.
FTP Client view
open-trunk
Use the open-trunk command to enable E&M non-signaling mode.
Analog E&M Voice Subscriber Line view
option
Use the option command to configure the self-defined options for a DHCP global address pool.
DHCP Address Pool view
organization
Use the organization command to specify the name of the organization to which the entity belongs.
PKI Entity view
organizational-unit
Use the organizational-unit command to specify the name of the organization unit to which this entity
belongs.
PKI Entity view
originating-rp
Use the originating-rp command to allow a MSDP to use the IP address of specified interface as the RP
address in the SA message originated.
MSDP view
osm connect slot
Use the osm connect slot command to connect the current control terminal to the OSM board to manage
the system on the OSM board. If you want to return from the OSM board to the operation interface on the
router, click hot key <Ctrl+k>.
User view
osm reboot slot
Use the osm reboot slot command to reset the OSM board.
User view
osm reload slot
Use the osm reload slot command to restart the operation system on OSM board.
User view
osm shutdown slot
Use the osm shutdown slot command to shut down the operation system on OSM board. This operation
equals to execute the turn off command on the operation system of OSM board.
User view