Filter
Top Products
142 3Com Router 5000/6000 Family
Command Reference
spf-schedule-interval
Use the spf-schedule-interval command to configure the route calculation interval of OSPF.
OSPF view
spf-slice-size
Use the spf-slice-size command to configure whether to set slice and the duration time each time when
IS-IS performs SPF route calculation.
IS-IS view
spt-switch-threshold
Use the spt-switch-threshold command to set the packet rate threshold when the PIM leaf router
switches from the RPT to the SPT.
PIM view
ssh authentication-type default
Use the ssh authentication-type default command to specify a default authentication mode for SSH
users.
System view
ssh client assign rsa-key
Use the ssh client assign rsa-key command to associate an SSH server with the name assigned to its
public key. When connecting to this server, the client verifies its trustworthiness based on this association.
System view
ssh client first-time enable
Use the ssh client first-time enable command to enable the SSH client to perform first-time
authentication on SSH servers.
System view
ssh server authentication-retries
Use the ssh server authentication-retries command to set the number of SSH connection
authentication retries, which is validated at next login.
System view
ssh server compatible_ssh1x enable
Use the ssh server compatible_ssh1x enable command to enable the SSH server to work with SSH1.X
clients.
System view
ssh server rekey-interval
Use the ssh server rekey-interval command to set the interval for updating the server key.
System view
ssh-server source-interface
Use the ssh-server source-interface command to specify a source interface, which must be an existing
local interface, for the SSH server. After that, the IP address of the specified interface is used as the source
IP address in each packet sent by the SSH server.
System view
ssh-server source-ip
Use the ssh-server source-ip command to specify a source IP address for the packets sent by the SSH
server. This IP address must be a local IP address.
System view
ssh server timeout
Use the ssh server timeout command to set a timeout for SSH connection authentication at login. It
becomes valid at next login.
System view
ssh user
Use the ssh user command to create an SSH user.
System view
ssh user assign
Use the ssh user assign command to assign one existing public key to a user. If a key exists, the new
assignment overrides.
System view
ssh user authentication-type
Use the ssh user authentication-type command to create an SSH user and specify an authentication
mode for it.
System view