Filter
Top Products
2 3Com Router 5000/6000 Family
Command Reference
Displaying Command Parameters
At the prompt, enter the name of the command followed by a space and ?. For example:
<router5000-xx>boot ?
The following parameters are displayed:
attribute-switch
Exchange the file main-attribute and backup-attribute.
boot-loader
Select a file to boot at the next time
bootrom
Update Bootrom
web-package
Set web resource package
To specify boot loader, enter the command as follows:
<router5000-xx>boot boot-loader ?
You only need to enter ? if parameters exist for the command.
Displaying Parent Menus
At the prompt, enter quit.
Displaying the User View Menu
Press <CTRL-Z>.
Obtaining Help
At the prompt, enter ?.
Further Information
For further information about how to use the command line interface, refer to the Command Reference Guide and
the Configuration Guide, which are both available as PDF documents on the CD that accompanied the unit.
Commands
l2tp-auto-client enable
Use the l2tp-auto-client enable command to enable the LAC client to set up L2TP tunnel.
Virtual Template Interface view
l2tp enable
Use the l2tp enable command to enable the L2TP function.
System view
l2tp-group
Use the l2tp-group command to create an L2TP group.
System view
l2tpmoreexam enable
Use the l2tpmoreexam enable command to enable the multi-instance function of L2TP.
System view
l2vpn-family
Use the l2vpn-family command to create or enter an L2VPN address family view.
BGP view
aaa-client
Use the aaa-client command to enter Voice AAA view.
Voice view