Filter
Top Products
70 3Com Router 5000/6000 Family
Command Reference
flag
Use the flag command to set the overhead byte of SONET/SDH frames.
CPOS Interface view
flag
Use the flag command to set the SDH overhead byte.
POS Interface view
flow control
Use the flow-control command to enable flow control on the Ethernet interface, which is useful only when
the peer end also supports flow control.
Ethernet Interface view
flow-control
Use the flow-control command to enable flow control on the Ethernet port to avoid packet drop when
congestion occurs.
Ethernet Port view
flow-control
Use the flow-control command to configure flow control mode.
User Interface view
flow interval
Use the flow-interval command to configure traffic statistic interval.
System view
flow-interval
Use the flow-interval command to configure the interval for measuring the average rate of the interfaces.
System view
flow-interval qos
Use the flow-interval qos command to configure QoS policy traffic statistical interval and QoS policy rate
updating interval.
System view
force-link
Use the force-link command to enable the GE interface to work in force mode.
GE Interface view
force-metering
Use the force-metering command to enable or disable the metering signal of R2 signaling.
R2 CAS view
format
Use the format command to format a storage device.
User view
fqdn
Use the fqdn command to specify the FQDN of an entity.
PKI Entity view
fr bump
Use the fr bump command to configure the standby PVC that will take over when a specified PVC goes
down.
FR Pvc-Group view
fr-class
Use the fr-class command to associate a frame relay class with the current frame relay virtual circuit or
frame relay interface.
Frame Relay DLCI view
fr class
Use the fr class command to create a frame relay class and enter frame relay class view.
System view
fr compression frf9
Use the fr compression frf9 command to enable the FRF9 compression function.
Frame Relay Interface view
fr compression iphc
Use the fr compression iphc command to enable the IP header compression.
Frame Relay Interface view