Filter
Top Products
3Com Router 5000/6000 Family 131
Command Reference
rip metricin
Use the rip metricin command to configure the additional route metric added to the route when an
interface receives RIP packets.
Interface view
rip metricout
Use the rip metricout value command to enable RIP to send routes out the interface with an additional
route metric added. This command applies to routes both locally learned and learned from other routers.
Use the
rip metricout value all-route command to enable RIP to send routes out the interface with an
additional route metric added. This command applies to locally redistributed routes in addition to those
locally learned and learned from other routers.
Interface view
rip output
Use the rip output command to configure an interface to transmit RIP packets to the external.
Interface view
rip split-horizon
Use the rip split-horizon command to configure an interface to use split horizon when transmitting RIP
packets.
Interface view
rip triggered
Use the rip triggered command to enable trigger RIP (TRIP).
Interface view
rip version
Use the rip version command to configure the version of RIP packets on an interface.
Interface view
rip work
Use the rip work command to enable the running of RIP on an interface.
Interface view
rlogin
Use the rlogin command to rlogin onto the specified remote host with the specified user name.
User view
rmdir
Use the rmdir command to delete a specified directory from the FTP server.
FTP Client view
rmdir
Use the rmdir command to delete the specified directory from the remote SFTP server.
SFTP Client view
rmdir
Use the rmdir command to delete a directory.
User view
rmon alarm
Use the rmon alarm command to set an alarm entry. When an exception occurs, the alarm is triggered. The
alarm in turn triggers the corresponding event, which can be log, trap, or log-and-trap.
System view
rmon event
Use the rmon event command to add an event entry.
System view
rmon history
Use the rmon history command to add a history control entry.
Ethernet Interface view
rmon prialarm
Use the rmon prialarm command to add an entry to the prialarm table.
System view
rmon statistics
Use the rmon statistics command to add a statistics entry.
Ethernet Interface view
root-certificate fingerprint
Use the root-certificate fingerprint command to configure the fingerprint for authenticating the CA
root certificate.
PKI Domain view