Filter
Top Products
150 3Com Router 5000/6000 Family
Command Reference
timer realtime-accounting
tUse the timer realtime-accounting command to configure a real-time accounting interval.
RADIUS view
timer realtime-accounting
Use the timer realtime-accounting command to configure a real-time accounting interval.
TACACS+ view
timer register-complete (R2)
Use the timer register-complete command to configure the timeout value for register signals of R2
signaling.
R2 CAS view
timer register-pulse (R2)
Use the timer pulse command to configure the persistence time of the register pulse signal of R2 signaling
(A3, A4 and A6, etc.).
R2 CAS view
timer response-timeout
Use the timer response-timeout command to configure the RADIUS server response timer.
RADIUS view
timer response-timeout
Use the timer response-timeout command to set the response timeout timer of the TACACS server.
TACACS+ view
timer retry
Use the timer retry command to configure the value of connection request re-try period.
MSDP view
timer ring (R2)
Use the timer ring command to configure the maximum time range before the signal tone of R2 signaling
is sent.
R2 CAS view
timer ring-back
Use the timer ring-back command to configure the maximum duration for the system to send the ringback
tone.
Voice Subscriber-Line view
timer spf
Use the timer spf command to configure the interval for the SPF calculation.
IS-IS view
timer wait
Use the timer wait command to set a timeout period for a probing attempt.
Detect Group view
timer wait-digit
Use the timer wait-digit command to configure the maximum time duration that the system waits for a
digit.
Voice Subscriber-Line view
timers
Use the timers command to modify value for the three timers, Period update, Timeout and
Garbage-collection, of RIP.
RIP view
timeslot-set
Use the timeslot-set command to configure the timeslot set to perform R2 signaling and digital E&M
signaling configurations.
CE1/PRI Interface view
timestamp
Use the timestamp command to enable the local end to send voice packets with timestamps.
Voice Entity view
tos
Use the tos command to assign a value to the ToS field in the header of HWPing test packets.
HWPing Test Group view
trace interval
Use the trace interval command to configure the interval for information recording in the debugging
process, that is, the number of voice packets upon the pass of which a record will be made.
Voice view