Filter
Top Products
16 3Com Router 5000/6000 Family
Command Reference
code nrzi
Use the code nrzi command to set the digital signal coding format to None-Return-to-Zero-Inverse (NRZI)
for a synchronous serial interface.
Synchronous Serial Interface view
code nrzi
Use the code nrzi command to configure the NRZI encoding of the synchronous serial port.
Synchronous Serial Interface System view
command-alias enable
Use the command-alias enable command to enable the command alias function.
System view
command-alias mapping
Use the command-alias mapping command to map an alias to a keyword.
System view
command-privilege
Use the command-privilege level command to assign a command level to the commands in a specified
view.
System view
common-name
Use the common-name command to specify the common name of an entity, take User name for example.
PKI Entity view
compare-different-as-med
Use the compare-different-as-med command to enable comparison of MED values of routes from
neighbors residing in different ASs when determining the best route.
BGP Unicast view
BGP Multicast view
VPNv4 view
compression
Use the compression command to configure the voice coding method according to priority level.
Voice Entity view
confederation id
Use the confederation id command to configure confederation identifier.
BGP view
confederation nonstandard
Use the confederation nonstandard command, the router can be compatible with the AS confederation
not adopting RFC1965.
BGP view
confederation peer-as
Use the confederation peer-as command to specify the sub-ASs constituting a confederation.
BGP view
congestion-threshold
Use the congestion-threshold command to enable congestion management function of frame relay virtual
circuit.
Frame Relay Class view
connection
Use the connection command to create a CE connection.
MPLS L2VPN CE view
connection-limit default
Use the connection-limit default command to configure the action when the limit policy is not available.
System view
connection-limit default amount
Use the connection-limit default amount command to set default threshold for connection limit.
System view
connection-limit enable
Use the connection-limit enable command to enable the connection limit function.
System view
connection-limit policy
Use the connection-limit policy command to create connection limit policy and enter its view.
System view