Filter
Top Products
44 3Com Router 5000/6000 Family
Command Reference
display fr pvc-infoc
Use the display fr pvc-info command to view the frame relay PVC table.
Any view
display fr statistics
Use the display fr statistics command to view the current Frame Relay statistics about receiving and
sending packets.
Any view
display fr switch-table
Use the display mfr command to view configuration and status information of the frame relay route to
confirm the correctness of the configuration.
Any view
display fr vofr-info
Use the display fr vofr-info command to view the VoFR information.
Any view
display ft 1 serial
Use the display ft1 serial command to view the configuration and state of the T1-F interface.
Any view
display ftp-server
Use the display ftp-server command to view the parameters of the current FTP server.
Any view
display ftp-server source-ip
Use the display ftp-server source-ip command to display the source IP address configured for the FTP
server.
Any view
display ftp source-ip
Use the display ftp source-ip command to display the source IP address configured for the FTP client.
Any view
display ftp-user
Use the display ftp-user command to view the parameters of the current FTP users.
Any view
display history-command
Use the display history-command command to view the history commands.
Any view
display hwatacs
Use the display hwtacacs command to view configuration information of specified or all TACACS+
schemes.
Any view
display hwping
Use the display hwping command, you can view test result(s).
Any view
display hwping statistics
Use the display hwping statistics command to view test statistics.
Any view
display icmp statistics
Use the display icmp statistics command to view statistics about ICMP messages.
Any view
display igmp group
Use the display igmp group command to view the member information of the IGMP multicast group.
Any view
display igmp interface
Use the display igmp interface command to view the IGMP configuration and running information on an
interface.
Any view
display igmp local
Use the display igmp local command to view the IGMP configuration and running information of the local
interface which receives and sends multicast data.
Any view