Filter
Top Products
8 3Com Router 5000/6000 Family
Command Reference
authentication
Use the authentication command to enable user authentication and authorization for the access service
number.
Voice Access-Number view
authentication
Use the authentication command to set the IP address, port number and shared key for the primary and
secondary TACACS+ authentication servers.
TACACS+ view
authentication-algorithm
Use the authentication-algorithm command to select the authentication algorithm for an IKE proposal.
IKE Proposal view
authentication-client method
Use the authentication-client method command to specify how the DVPN server that applies the DVPN
policy authenticates clients. None, CHAP, and PAP are currently available.
Dvpn-Policy view
authentication-did
Use the authentication-did command to enable authentication for all one-stage dial (direct dial) users.
Voice AAA view
authentication-method
Use the authentication-method command to select the authentication method used by an IKE proposal.
IKE Proposal view
authentication-mode
Use the authentication-mode command to set the authentication mode at login.
Use the
authentication-mode none command to set the authentication mode to none, that is, no
authentication at login.
User Interface view
authentication-mode
Use the authentication-mode command to configure one area of OSPF to support the authentication
attribute.
OSPF Area view
authentication-server method
Use the authentication-server method command to specify a client whether or not to authenticates the
DVPN server it accesses.
Dvpn-Class view
authentication super hwtacacs-scheme
Use the authentication super hwtacacs-scheme command to configure super authentication scheme for
a domain.
ISP Domain view
authorization
Use the authorization command to configure an authorization scheme for the current ISP domain.
ISP Domain view
authorization
Use the authorization command to set the IP address, port number and shared key for the primary and
secondary TACACS+ authorization servers.
TACACS+ view
authorization-level
Use the authorization-level command to configure a local caller authorization level for the voice entity.
Voice Entity view
auto-config
Use the auto-config command to implement the auto-config operation.
System view
auto-config enable
Use the auto-config enable command to enable auto-config.
System view
auto-execute command
Use the auto-execute command command to set a command to be automatically executed.
User Interface view