Filter
Top Products
Appendix J Factory Default List
J.2 Connectivity
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
1034
Modify FC Port
Parameters
(When the port
mode is "CA" or
"CA/RA")
REC Transfer Mode
• Sync
• Async Stack
• Async
Consistency
• Async Through
Enable
• Enable
• Disable
This item is displayed only when
"Port Mode" is "CA/RA".
Modify FC Port
Parameters
(When the port
mode is "RA")
Connection FC-AL
• Fabric
• FC-AL
Set Loop ID Manual
• Manual
• Auto
Loop ID When "Set Loop ID" is "Manual"
• 0x0
When "Set Loop ID" is "Auto"
• Ascending
When "Set Loop ID" is "Manual"
• 0x0 – 0x7D
When "Set Loop ID" is "Auto"
• Ascending
• Descending
Transfer Rate Auto-negotiation
• Auto-negotiation
• 1 Gbit/s
• 2 Gbit/s
• 4 Gbit/s
• 8 Gbit/s
• 16 Gbit/s
The available transfer rate varies
depending on the CA type.
Frame Size 2048
• 512 (bytes)
• 1024 (bytes)
• 2048 (bytes)
REC Line No. 0
• 0 – 127
REC Transfer Mode
• Sync
• Async Stack
• Async
Consistency
• Async Through
Enable
• Enable
• Disable
Function Setting item Default value Allowed input