Filter
Top Products
Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
459
■ When registering a host by selecting from the host list
(1) Click the [Now Connected] tab.
(2) Select a host to be registered from the SAS host list, and click the [Add] button.
- Checkbox to select a host
Select the SAS host checkbox to be registered in a host group.
→ A confirmation screen appears.
Filter setting
Filter Description
SAS Address
Input the SAS address to be displayed.
SAS hosts matching or partially matching the input SAS address are displayed.
When not using the SAS address for filtering, leave this item blank.
Host Group
Input the host group name that is to be displayed.
SAS hosts which belong to any host groups that match or partially match the entered
name are displayed.
When not using the host group name for filtering, leave this item blank.
Host Response
Select the host response name that is to be displayed.
Any SAS hosts that are allocated to the selected host response are displayed.
An error screen appears in the following conditions:
• When the "Host Group Name" is not entered
• When the "Host Group Name" does not satisfy the input conditions
• When the "Host Group Name" overlaps with an existing host group name
(Host group names cannot overlap with any other host group names, irrespective of the interface
types.)
• When no hosts are registered in a host group, or when nine or more hosts are registered in a host
group
• When the total number of host groups has exceeded the maximum number for the ETERNUS DX
Disk storage system
• When the total number of hosts has exceeded the maximum number for the ETERNUS DX Disk
storage system