Filter
Top Products
Chapter 9 Connectivity Management
9.1 Connectivity Status
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
377
• Host Group
The host group name, to which the iSCSI host belongs, is displayed.
When the iSCSI host belongs to two host groups, the host group names are separated with a ", (comma)"
and displayed. If the iSCSI host belongs to three or more host groups, the names of the first two groups and
a [more...] link are displayed.
If the iSCSI host does not belong to an host group, a "-" (hyphen) is displayed.
• Host Response
The host response that is assigned to the iSCSI host or to the host group of the iSCSI host is displayed.
• Status
Whether the host affinity setting is applied to the iSCSI host is displayed.
"Host Affinity Setting" is to specify association between "Host Group", "CA Port Group", and "LUN Group" or
association between "Host", "CA Port", "and "LUN Group". The host affinity setting specifies the path
between each host and port.
- Active
The host affinity setting is applied to the iSCSI host. The LUN group can be accessed from the iSCSI host.
- Inactive
The host affinity setting is not applied to the iSCSI host.
• IP Version
The IP version when the IP address was registered for the iSCSI host is displayed.
• IP Address
The IP address of the iSCSI host is displayed.
Note that the IPv6 address is displayed as an abbreviation. Refer to "IPv6 Address Notation" (page 378)
for
details.
If the IP address is not specified, the field is blank.
• Alias Name
The iSCSI host Alias Name is displayed.
If the Alias Name is not set, the field is blank.
• CHAP User ID
The iSCSI host user ID is displayed.
If the user ID is not set, the field is blank.
Filter setting
Filter Description
Name
Input the iSCSI host name that is to be displayed.
When not using the iSCSI host name for filtering, leave this item blank.
iSCSI Name
Input the iSCSI name that is to be displayed.
When not using the iSCSI name for filtering, leave this item blank.
Host Response
Select the host response name that is to be displayed.
The iSCSI hosts, to which the same host response has been assigned, can be used for
filtering.
IP Version
Select the IP version that is to be displayed.
The iSCSI hosts with the same IP version are displayed.