Filter
Top Products
Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
468
■ When adding a host by manually specifying the host
(1) Click the [Manual Input] tab.
(2) Click the [Add] button.
→ The [Add FC/FCoE Host] screen appears.
• If the WWN is not displayed when clicking the [Rediscover] button, make sure that there is no error
in the connection environment, such as the connection between the host and the switch, and the
CA port settings of the ETERNUS DX Disk storage system. If there is no error in the connection
environment, contact the Support Department, or specify the WWN manually.
• An error screen appears in the following conditions:
- When the "Host Group Name" is not entered
- When the "Host Group Name" does not satisfy the input conditions
- When the "Host Group Name" overlaps with an existing host group name
(Host group names cannot overlap with any other host group names, irrespective of the
interface types.)
- When a host cannot recognize some LUNs
- When no hosts are registered in a host group, or when nine or more hosts are registered in a
host group (for ETERNUS DX8700 S2, 65 or more hosts are registered in a host group)
- When the total number of hosts has exceeded the maximum number for the ETERNUS DX Disk
storage system