Filter
Top Products
Chapter 8 Advanced Copy Management
8.2 Functions in the Action Area for Advanced Copy
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
344
8.2.14 Export All Copy Path
This function exports the copy path information registered in the ETERNUS DX Disk storage system, and saves
the information in a file.
The saved file can be used as path information when creating a copy path, so that manual registration of the
path information will not be required.
The procedure to export the copy path information is as follows:
Procedure
1 Click [Export All Copy Path] in [Action].
2 Click the [Create Data] button.
→ The copy path information, which has been registered in the ETERNUS DX Disk storage system, is
exported.
After the copy path information export has been finished, a screen to execute downloading the file
is displayed.
• A copy path information cannot be exported when it has not been registered in the ETERNUS DX Disk
storage system.
• The format of the copy path information file has been changed in controller firmware version V10L30.
When the copy path information includes an IPv6 address, make sure to export the path information file
from an ETERNUS DX Disk storage system with controller firmware version V10L3x or later. An ETERNUS
DX Disk storage system with controller firmware version V10L2x or earlier cannot export correct IPv6
addresses.
If the copy path information has not been registered in the ETERNUS DX Disk storage system, an error
screen appears.