Filter
Top Products
Chapter 9 Connectivity Management
9.1 Connectivity Status
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
406
9.1.12 LUN Group : LU QoS Group Detail
The bandwidth limit for each LUN is displayed.
The following items are displayed in the Main area:
• LUN Group
The LUN group name is displayed. If the CLI command ("set mapping") is used for LUN mapping, a "-"
(hyphen) is displayed.
• LU QoS Group No.
The LU QoS group number is displayed. If a LU QoS group number is not configured, a "-" (hyphen) is
displayed.
- For ETERNUS DX80 S2/DX90 S2/DX410 S2/DX440 S2/DX8100 S2: 0 - 543
- For ETERNUS DX8700 S2: 0 - 2175
• Host LUN
The host LUN number is displayed.
• Name
The volume name is displayed.
• Bandwidth Limit
The maximum performance is displayed in IOPS (throughput value). If the bandwidth limit has not been
configured (the bandwidth has not been limited), "Unlimited" is displayed.