Fujitsu DX80 S2/DX90 S2 Computer Drive User Manual


  Open as PDF
of 1066
 
Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
823
SSL Server Certification
To use SSL server certification for communication with the AIS Connect server, select "Enable". To not
use SSL server certification, select "Disable".
When "Enable" is selected, server certification is performed with the root certificate that is registered
in the ETERNUS DX Disk storage system for AIS Connect server communication. When there is no
appropriate root certificate that authenticates server certification that is received from the AIS
Connect server or when the root certificate has expired, communication with the AIS Connect server
fails. The expiration date of the root certificate can be checked from the [Root Certificate] screen.
Refer to "11.1.4.1 Root Certificate" (page 721)
for details.
Auto Send Log
Select whether to enable or disable the automatic log transmission.
When "Auto Send Log" is enabled and notification of Error Severity Level or Warning Level occurs, a
log is collected and sent to the AIS Connect server in approximately five minutes. The maximum size
of a log is 1.44MB. Note that I/O Module logs are not included.
If a send log request is already performed once log collection is complete, send log requests are not
performed. If a communication error occurs and a connection to the AIS Connect server cannot be
established, logs cannot be sent. A log that fails to be sent is not resent.
Proxy Server
Input the IPv4 address or the Fully Qualified Domain Name (FQDN) of the proxy server. Make sure to
input "Proxy Server" and "Port No." together.
If a proxy server is not used, this item does not need to be set.
- IPv4 address
xxx.xxx.xxx.xxx
xxx: 1 - 255 for the top field (decimal)
xxx: 0 - 255 for other fields (decimal)
- FQDN
Up to 63 alphanumeric characters and symbols ("." (dot), ":" (colon), "-" (hyphen), and "_ "
(underscore) can be used)
Port No.
Input the port number of the proxy server between 0 and 65535. Make sure to input "Proxy Server"
and "Port No." together.
If a proxy server is not used, this item does not need to be set.
Connection Type
Select the communication method for the proxy server.
- HTTP
Basic/NTLM HTTP authentication
- SOCKS
SOCKSv5 authentication
User Name
Specify the user name for the proxy server authentication.
If a proxy server is not used, this item does not need to be set.
The following input condition applies:
- Up to 32 alphanumeric characters
Change Password
To change the proxy server authentication password, select the checkbox.
Password
Select the "Change Password" checkbox and then input the password for proxy server
authentication. When inputting the password, "*" is displayed to hide the specified value.
If a proxy server is not used, this item does not need to be set.
The following input condition applies:
- Up to 64 alphanumeric characters and symbols