Filter
Top Products
Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
526
2 Specify the name of the port group to be created, select all the ports to be registered in the
port group, and click the [Create] button.
• Name
Specify the port group name.
An existing port group name cannot be specified.
The following input conditions apply:
- Up to 16 alphanumeric characters and symbols (except ", (comma)" and "?")
- Space
• Checkbox to select ports
Select the checkbox of the FCoE port to be registered in an FCoE port group.
→ A confirmation screen appears.
• When a port that has the affinity mode enabled ("ON") is selected, ports that have the affinity
mode disabled ("OFF") cannot be selected.
• When a port that has the affinity mode disabled ("OFF") is selected, ports that have the affinity
mode enabled ("ON") cannot be selected.
• Up to eight ports can be selected.
An error screen appears in the following conditions:
• When the port group name does not satisfy the input conditions
• When the port group name has not been entered