Filter
Top Products
Chapter 8 Advanced Copy Management
8.2 Functions in the Action Area for Advanced Copy
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
326
6 Set the iSCSI port in the [iSCSI Port Information Setting] screen, and click the [Next >>]
button.
• IP Version
Select the IP version of the port to set a copy path.
If the copy path is already specified for the port when the copy path information file is being loaded,
the IP version that is set for the port is selected as the default setting. For other ports, "IPv4" is set as
the default setting.
This item is not displayed when "Port Type" is "iSCSI-RA" (for older storage system connection),
"iSCSI-RA 1-Port", or "iSCSI-RA 2-Port".
- IPv4
- IPv6 (Link Local)
- IPv6 (Connect IP)
• IP Address
Input the IP address of the iSCSI port.
This item is required when "Port Type" is "iSCSI-RA" (for older storage system connection), "iSCSI-RA
1-Port", or "iSCSI-RA 2-Port" or when "IP Version" is "IPv4". If not specified, the field is blank.
The following input conditions apply:
- Numeric characters
- First text box: "1" - "255"
- Other text boxes: "0" - "255"
• IPv6 Link Local Address
Input the IPv6 link IP address of the iSCSI port.
This item is required when "IP Version" is "IPv6 (Link Local)".
Refer to "Available IPv6 Address" (page 757)
for details. Note that the current setting is displayed by
an abbreviation.
This item is not displayed when "Port Type" is "iSCSI-RA" (for older storage system connection),
"iSCSI-RA 1-Port", or "iSCSI-RA 2-Port". If not specified, the field is blank.
The following input condition applies:
- fe80::xxxx:xxxx:xxxx:xxxx
xxxx: 0 - ffff (FFFF) (hexadecimal, alphanumeric characters)
Refer to "IPv6 Address Notation" (page 378)
for details.
• IPv6 Connect IP Address
Input the IPv6 connect IP address of the iSCSI port.
This item is required when "IP Version" is "IPv6 (Connect IP)".
The following IPv6 addresses can be used; "global address", "unique local address", and "6to4
address". Refer to "Available IPv6 Address" (page 757)
for details. Note that the current setting is
displayed by an abbreviation.
This item is not displayed when "Port Type" is "iSCSI-RA" (for older storage system connection),
"iSCSI-RA 1-Port", or "iSCSI-RA 2-Port". If not specified, the field is blank.
The following input condition applies:
- xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
xxxx: 0 - ffff (FFFF) (hexadecimal, alphanumeric characters)
Refer to "IPv6 Address Notation" (page 378)
for details.