Fujitsu DX80 S2/DX90 S2 Computer Drive User Manual


  Open as PDF
of 1066
 
Chapter 11 System Management
11.1 System Status
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
730
The following items are displayed in the Main area:
Path Group
The path group number is displayed. Click this item to display the [Path Group Detail Information] screen.
Refer to "11.1.14 Path Group Detail Information" (page 734)
for details.
A path group combines the paths for data migration into a group for each source storage system. The paths
from a single source storage system to the ETERNUS DX disk storage system (destination) constitute a path
group.
Vendor ID
The manufacturer name of the source storage system to which the path is created is displayed.
An inconvertible code is displayed as "*".
Product ID
The product name of the source storage system to which the path is created is displayed.
An inconvertible code is displayed as "*".
Serial Number
The serial number of the source storage system to which the path is established is displayed.
An inconvertible code is displayed as "*".
Progress
The progress of Storage Migration for the path group is displayed.
Status
The general status of Storage Migration for the path group is displayed.
- Complete
All Storage Migration operations have completed normally.
- Error
There are one or more LUNs that do not exist in the migration source volume, or there are one or more
volumes for which Storage Migration failed due to error (displayed in red characters).
- Stop
Storage Migration has been stopped for one or more volumes (all other volumes have completed
Storage Migration normally), or Storage Migration of all the volumes has been stopped.
- Normal
Other than above.
The status display priority order is " Error" > " Normal" > " Stop" > " Complete".