Filter
Top Products
Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
568
• Transfer Rate
Select the transfer speed for the target port.
- Auto-negotiation
- 1.5 Gbit/s
- 3 Gbit/s
- 6 Gbit/s
• Reset Scope
Specify the reset scope of the target port.
Reset scope is the range where the command reset from the server is performed, when the target
port is connected to multiple servers.
- I_T_L (I: Initiator, T: Target, L: LUN)
Reset (cancel) the command request from the server that sent the command reset request.
- T_L (T: Target, L: LUN)
Reset (cancels) the command request from all of the servers that are connected to the port.
• Release Reservation if Chip is Reset
Select whether to "Enable" or "Disable" the function to release the reserved status of the volume
when the target port (chip) is reset.
→ A confirmation screen appears.
3 Click the [OK] button.
→ Modification of the SAS port parameters starts.
4 Click the [Done] button to return to the [SAS Port Group] screen.
End of procedure